Network Optix also has an ARM-based Nx Server application for Linux powered devices like the Nvidia Jetson Nano, Raspberry Pi, and other single board computers. What about ARM-based devices?ĪRM is gaining popularity - Microsoft uses ARM in some of their Surface devices and Apple has recently released Macbooks utilizing their new ARM-based M1 chip. A System with 100 cameras per server, dozens or hundreds of layouts, numerous rules, and hundreds of concurrently connected users would require much more substantial hardware based on our recommendations below.įor large system deployments, we suggest users refer to the Large Systems Deployments support article or consult your reseller to support you with the design of your system. NOTE: Since it's extremely difficult to offer hardware recommendations that will meet the requirements for all systems, we highly recommended large system deployments to refer to the Large Systems Deployment support article or consult your reseller to support you with the design of your system.Īlthough Nx Server is a very lightweight application that can run on an ARM-based device like the Raspberry Pi, there are too many variables and use cases to determine viable minimum requirements.įor example, a System with one camera, no saved layouts, few rules, and a single user on lightweight hardware will work just fine. * = you can use the Nx System calculator to estimate the number of servers and storage required for your system. When considering using an ARM-based device, the hardware should comply with the requirements described in this article. Intel i3 8th gen or AMD RyQuad-Core or betterĭedicated SSD or NVMe disk for the OS, 128 GB or larger Sufficient to handle the load created by the cameras.*įor Servers with more than 50 connected devices and max of 128 devices Please make sure that the read/write capacity of the storage drives is N/A (only applicable when a GUI is required)ĭedicated SSD or NVME disk for the OS, 128 GB or larger Intel Celeron 8th gen or AMD Athlon Gold Quad-Core or better We recommend using the following specifications and prerequisites mentioned to have good performance for the Nx Server application: For Servers with less than 50 connected devices
Note: The recommendations below are based on the assumption that the computer being used is dedicated to the Nx Server application with the default settings and is not used to run additional applications concurrently as this may impact the performance and stability of your System. In order to use the Nx Server application, the system needs to have at least the following prerequisites:
WAVES NX 5.1 REQUIREMENT SOFTWARE
That being said, Nx Witness, and all software in general, is only as stable as the hardware it is installed upon.Īlthough Nx Server is an extremely lightweight application that uses a minimum amount of hardware resources, we do recommend using the following hardware specifications for most situations. The Nx Witness Server application can be installed on most modern computers with a 64-bit architecture.
What are the recommended hardware specifications for Nx Server?
0 kommentar(er)
